Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. 3
    4. : Guide to disassembling the front seat of Mazda 3.

Mazda 3 - Video tutorial

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part: Seat
Operation: Guide to disassembling the front seat of Mazda 3.

Today's guide will show us the process of how to disassemble and replace the front seat of the Mazda 3, following the instructions below. First, we open the front door and begin to unscrew the fastening screws we find on the seat guides. We move the seat forward and then backward to uncover all the screws, as shown in the video. At this point, we disconnect the electrical connector found under the seat, removing the seat from the cabin. If necessary, we clean or replace it, applying the reverse process for reassembly!


Posted on 6 May 2023 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos