Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Instructions for Removing the Front Wing

Model: Mazda 3 BL, MK 2 - Years: 2009, 2010, 2011, 2012, 2013
Part: Body

See other generations:
Video tutorial

To remove the front wing, you must first detach the bumper and the front lights: start by opening the front bonnet and removing the push clips along the closure line. Remove the wheel arch liners to access the additional screws securing the bumper, then remove those along the lower edge to complete the disassembly.

Next, move on to removing the lights and then the wings by locating the respective securing screws just below the cross member and beneath the seal under the windscreen.


Updated on 22 February 2026 by ScegliAuto


Related tutorials

Instructions for Removing the Front Headlamp
Instructions for Removing the Front Headlamp
Mazda 3 (2009-2013 / BL, MK 2) To remove the front headlamp, you first need to take off the front bumper: start by opening the bonnet and removing the clips on the slam panel. Then…
How to Remove the Fog Light from the Mazda 3 Bumper
How to Remove the Fog Light from the Mazda 3 Bumper
Mazda 3 (2009-2013 / BL, MK 2) How do you remove the front fog light from the Mazda 3? Follow these steps to remove the fog light from the Mazda. Lift the car with a jack, then loc…
Replacing the Front Indicator Bulb on a Mazda 3
Replacing the Front Indicator Bulb on a Mazda 3
Mazda 3 (2009-2013 / BL, MK 2) Today, this guide provides instructions to dismantle and replace the front indicator bulb on a Mazda 3. First, unscrew the fastening screws of the fr…

How to Reset the AdBlue Warning Light on a Peugeot Boxer

To reset the AdBlue system on a 2018 Peugeot Boxer, follow these steps: Start the engine and ensure the vehicle is parked in a well-ventilated area. Locate the "MENU" button on the dashboard or steering wheel controls. Press and hold the "MENU" button until the menu options appear on the display. Use the arrow buttons or scroll wheel to access the "Vehicle Settings" or "Settings" menu. Select the "AdBlue" or "AdBlue System" option. Look for the "Recharge" or "Reset" option in the AdBlue menu. Once you find the reset option, select it and confirm your choice when prompted. The system will be reset, and a confirmation message may appear on the display. Turn off the engine and wait a few seconds. Restart the engine and check that the AdBlue system has been reset.

Watch the video!


by ScegliAuto

More videos