Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 5
    4. : Shift knob

Mazda CX-5 - Shift knob

Shift Knob Mazda CX-5 (2012-2017 / mk 1, ke)

Mazda CX-5 (2012-2017 / MK 1, KE)
How to Remove the Gear Knob on a Mazda CX-5
In the following guide, you will find a description of the simple steps you need to take to easily remove the gear knob inside the cabin of your Mazda CX-5. …Read all…
Posted on 9 May 2026 by ScegliAuto
Airbag (1) Speaker (1) Car stereo (5) Anti-roll bar (1) Roof rack bars (4) Battery (10) Control arm (1) Transmission (3) Spark plugs (2) Glove compartment (2) Key (38) Timing belt (1) V-belt (2) Onboard computer (10) Checks and maintenance (20) Dashboard (2) Brake rotors (1) Rear bench seat (2) Headlight (2) Tail light (5) Fog lights (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (6) Oil filter (1) Parking brake (1) Accessory kit (4) Light bulb (5) Headlight bulb (6) Tail light bulb (4) License plate light (5) Starter motor (1) Transmission fluid (1) Engine oil (4) Clock (9) Door trim panel (10) Front bumper (2) Rear bumper (2) Brake pads (8) Tires (2) Shift knob (1) Fuel pump (1) Car door (3) Power window switch (1) Instrument cluster (5) Wheel (4) Fuse box (21) Seat (1) Side mirror (9) AdBlue warning light (2) Warning light – error code (18) (25) Tire pressure warning light (8) Service warning light (97) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (11) Cylinder head (1) Blower motor (3) Steering wheel (3)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos