Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 5
    4. : Roof Rack Bars

Mazda CX-5 - Roof Rack Bars

Mazda CX-5 (2017-2023 / MK 2)
How do you install the roof racks on the Mazda CX-5?
The installation of roof racks on the Mazda CX-5 is done by levering with an object in order to detach the longitudinal moldings located on the sides of the …read all…
Posted on 15 December 2023 by ScegliAuto
Mazda CX-5 (2017-2023 / MK 2)
How are roof bars installed on the Mazda CX-5?
To be able to install the roof bars of the Mazda CX-5 you need to pry an object so that the longitudinal moldings that are on the sides of the roof can be …read all…
Posted on 20 October 2022 by ScegliAuto
Mazda CX-5 (2012-2017 / MK 1, KE)
How to mount the luggage rack on the Mazda CX 5 [USA]
To mount a luggage carrier on a Mazda CX 5 it is necessary to operate as follows. Locate the two longitudinal plastic profiles on the car roof and, using a …read all…
Posted on 22 April 2024 by ScegliAuto
Car stereo (5) Anti roll bar (1) Roof Rack Bars (3) Battery (10) Arm (1) Gearbox (2) Spark plugs (2) Glove box (2) Key (16) Timing belt (1) -board computer (17) Checks and maintenance (41) Dashboard (2) Brake discs (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (10) Cabin air filter (10) Diesel filter (4) Oil filter (1) Window lift switch (1) Accessory Kit (3) Light bulb (4) Headlight bulb (6) Rear light bulb (4) License plate light (4) Gear oil (1) Engine oil (4) Door panel (6) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (5) Fuel pump (1) Door (1) Window lift button (1) Instrument cluster (18) Wheel (3) Fuse box (3) Outside rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (10) Engine head (1) Interior blower (1) Steering wheel (3)

How do you adjust the clutch cable on the Kia Picanto?

To be able to adjust the clutch cable of the Kia Picanto you need to open the hood so that you have access to the components inside the engine compartment: in order to reach the cable you will need to remove some components on the right side, such as the battery and the air filter. Below them you will find the clutch cable, which will have to be adjusted by screwing or loosening the bolt placed at the end of the cable. This will make the pedal harder or softer; after the adjustment, it will be possible to assemble all the components by closing the hood.

Watch the video!


by ScegliAuto

More videos