Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 5
    4. : Front bumper

Mazda CX-5 - Front bumper

Front Bumper Mazda CX-5 (2012-2017 / mk 1, ke)

Mazda CX-5 (2012-2017 / MK 1, KE)
How to Remove the Front Bumper of a Mazda CX5 Mk1
This guide shows how to remove the front bumper of the Mazda CX5 Mk1. The first step is to remove the plastic cover of the engine bay by detaching the plastic …Read all…
Posted on 1 November 2026 by ScegliAuto
Mazda CX-5 (2012-2017 / MK 1, KE)
Guide to Front Bumper Replacement
The following guide shows how to replace the bumper on your car. For small interventions like this, you can do it yourself without needing to take the car to a …Read all…
Posted on 16 February 2026 by ScegliAuto
Airbag (1) Speaker (1) Car stereo (5) Anti-roll bar (1) Roof rack bars (4) Battery (10) Control arm (1) Transmission (3) Spark plugs (2) Glove compartment (2) Key (39) Timing belt (1) V-belt (2) Onboard computer (11) Checks and maintenance (20) Dashboard (2) Brake rotors (1) Rear bench seat (2) Headlight (2) Tail light (5) Fog lights (2) Air filter (12) Cabin air filter (14) Fuel filter (1) Diesel fuel filter (6) Oil filter (1) Parking brake (1) Accessory kit (4) Light bulb (5) Headlight bulb (6) Tail light bulb (4) License plate light (5) Starter motor (1) Transmission fluid (1) Engine oil (4) Clock (9) Door trim panel (10) Front bumper (2) Rear bumper (2) Brake pads (8) Tires (2) Shift knob (1) Fuel pump (1) Car door (3) Power window switch (1) Instrument cluster (5) Wheel (4) Fuse box (22) Seat (1) Side mirror (9) AdBlue warning light (2) Warning light – error code (18) (1) Tire pressure warning light (34) Service warning light (98) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (11) Cylinder head (1) Blower motor (3) Steering wheel (3)

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos