Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 5
    4. : Gearbox

Mazda CX-5 - Gearbox

Mazda CX-5 (2012-2017 / MK 1, KE)
How to change the oil in the automatic transmission of the Mazda Cx-5
To replace the gearbox oil of the Mazda Cx-5 we start by raising the car on the left side (driver's side), go under the car and remove the oil pan cover, with …read all…
Posted on 23 May 2022 by ScegliAuto
Mazda CX-5 (2017-2023 / MK 2)
How to install steering wheel paddles in the Mazda CX-5
In today's video you will see how to install the paddles on the steering wheel in the Mazda CX-5. First, proceed with the installation of all the components …read all…
Posted on 19 May 2022 by ScegliAuto
Car stereo (5) Anti roll bar (1) Roof Rack Bars (3) Battery (10) Arm (1) Gearbox (2) Spark plugs (2) Glove box (2) Key (16) Timing belt (1) -board computer (17) Checks and maintenance (41) Dashboard (2) Brake discs (1) Headlight (1) Tail light (4) Fog lights (1) Air filter (10) Cabin air filter (10) Diesel filter (4) Oil filter (1) Window lift switch (1) Accessory Kit (3) Light bulb (4) Headlight bulb (6) Rear light bulb (4) License plate light (4) Gear oil (1) Engine oil (4) Door panel (6) Front bumper (2) Rear bumper (2) Brake pads (6) Tires (5) Fuel pump (1) Door (1) Window lift button (1) Instrument cluster (18) Wheel (3) Fuse box (3) Outside rearview mirror (2) Manufacturer's coat of arms (1) Windscreen wipers (10) Engine head (1) Interior blower (1) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos