Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Roof Bars on a Mazda CX-5?

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Roof rack bars

To install the roof bars on a Mazda CX-5, use a tool to pry off the longitudinal trim pieces located at the sides of the upper section: by removing these trims, you will be able to insert new longitudinal bars with specific inserts for fitting the cross bars. Once the longitudinal bars are installed, insert the roof bars perpendicularly into the designated inserts: at this point, secure them with screws, ensuring they do not cause any issues.

Updated on 2 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Mazda CX-5 (2017-2024 / MK 2) To install roof bars on a Mazda CX-5, use a lever to detach the longitudinal trims located at the sides of the roof. Once these trims are removed, yo…
Mazda CX-5 (2017-2024 / MK 2) Fitting roof bars on a 2020 Mazda CX-5 is a straightforward operation that can be done independently with the help of our short video tutorial. The f…
Mazda CX-5 (2017-2024 / MK 2) In this guide we will see the main instructions that will allow us to install the roof racks of the Mazda CX-5. First of all, let's remove the gasket…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos