Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the rear seats in the Mazda CX-3?

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Fuse box

In this tutorial, we can see how to remove the rear seats in the Mazda CX-3, an extremely simple and fast operation. First of all, we open both rear doors and the tailgate, then we grab the seat from the front edge, pull it forcefully upwards and separate it from the base. Next, we unscrew all the bolts indicated with a socket wrench, lower the backrests and, after removing the additional side bolts, we remove the backrests from the cabin. At this point, we can position the replacement parts and assemble them following the reverse procedure.

Posted on 5 September 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you adjust the seat on the Mazda CX-3?
How do you adjust the seat on the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) To be able to adjust the seat of the Mazda CX-3 it is necessary to use the special levers located in correspondence with the seat itself: these lever…
How to replace the battery of the Mazda CX3 key.
How to replace the battery of the Mazda CX3 key.
Mazda Cx 3 (2015-2023 / MK 1) In this video, the procedure for replacing the battery of the Mazda CX3 key is shown. In order to replace the key battery, you must first remove the …
How to remove the car radio of the Mazda CX 3 2017
How to remove the car radio of the Mazda CX 3 2017
Mazda Cx 3 (2015-2023 / MK 1) If you want to disassemble the factory radio in your 2017 Mazda CX 3 on your own, you must follow the steps described in this new guide aimed at you.…

How to Remove the Original Radio on a Ford C Max

Learn how to remove the original radio on a Ford C Max. First, use a plastic trim tool to remove the upper dashboard cover panel, then, with the aid of a screwdriver, unscrew the securing screws located on the metal tabs at the top sides of the stereo. Now, pull the air vents with the integrated frame away from the dashboard, unscrew the side securing screws of the stereo, disconnect the various power connectors located at the rear of the stereo and the antenna reception cable, and extract the radio from its housing. To reassemble the various disassembled parts, proceed in reverse order.

Watch the video!


by ScegliAuto

More videos