Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the car radio of the Mazda CX 3 2017

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Car stereo

If you want to disassemble the factory radio in your 2017 Mazda CX 3 on your own, you must follow the steps described in this new guide aimed at you. First of all, make sure you have a 10 millimeter Torx key available, then go inside the car and remove the two plastic covers located respectively below and above the radio. Once this simple operation is completed, use the Torx key to unscrew the screws holding the radio in place and disconnect the electrical cable located at the back to finish the procedure.

Posted on 27 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to disassemble the external rearview mirror of the Mazda CX-3
How to disassemble the external rearview mirror of the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) Today's step-by-step instructions will show us how to disassemble and replace (or repair) the external rearview mirror of the Mazda CX-3. First, we o…
How to Remove the External Wing Mirror on the Mazda CX-3
How to Remove the External Wing Mirror on the Mazda CX-3
Mazda Cx 3 (2015-2023 / MK 1) In this guide, learn how to remove and replace the external wing mirror on the Mazda CX-3. First, open the front door and start by removing the plast…
How to remove the rear seats in the Mazda CX-3?
How to remove the rear seats in the Mazda CX-3?
Mazda Cx 3 (2015-2023 / MK 1) In this tutorial, we can see how to remove the rear seats in the Mazda CX-3, an extremely simple and fast operation. First of all, we open both rear …

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos