Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 3
    4. : How to replace the battery of the Mazda CX3 key.

Mazda Cx 3 - Video tutorial

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Key
Operation: How to replace the battery of the Mazda CX3 key.

In this video, the procedure for replacing the battery of the Mazda CX3 key is shown. In order to replace the key battery, you must first remove the emergency key. After that, you need to use a flat-head screwdriver to pry the two tabs, and then insert the screwdriver along the edges of the key and rotate it to lift the edges. At this point, you need to remove the back part and then use your fingers to remove the battery cover and remove the battery. Now, insert the new battery and close the key by applying pressure with your fingers. The battery for this key is CR2025.


Posted on 4 August 2023 by ScegliAuto

    Frequently Asked Questions

    • Cx 3 2015-2023 - Why is the key of the Mazda CX-3 not working? Read Answer
    • Cx 3 2015-2023 - Why is the key not recognized on the Mazda CX 3? Read Answer
    • Cx 3 2015-2023 - How to start the engine of a Mazda CX 3 with an empty key? Read Answer
    • Cx 3 2015-2023 - Keyless ignition key problem on Mazda Cx3 Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos