Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mazda
    3. :
  3. Cx 3
    4. : How to replace the key battery in Mazda CX3

Mazda Cx 3 - Video tutorial

Model: Mazda Cx 3 MK 1 - Years 2015-2023
Part: Key
Operation: How to replace the key battery in Mazda CX3

Replacing the battery in the key of your Mazda CX3 is very simple and thanks to the following dedicated mini guide you will be able to complete the entire operation in a few seconds. First locate and press the small button located on the back of the cover and remove the emergency key. Then open the key completely (you can help yourself with a common flat screwdriver) and proceed with the removal of the old battery. Once this is done, insert the new battery (model CR2025) and reassemble the cover correctly. At this point all that remains is to test the functioning of your key.


Posted on 10 June 2023 by ScegliAuto

    Frequently Asked Questions

    • Cx 3 2015-2023 - Why is the key of the Mazda CX-3 not working? Read Answer
    • Cx 3 2015-2023 - Why is the key not recognized on the Mazda CX 3? Read Answer
    • Cx 3 2015-2023 - How to start the engine of a Mazda CX 3 with an empty key? Read Answer
    • Cx 3 2015-2023 - Keyless ignition key problem on Mazda Cx3 Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos