Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the SCR, DPF, and AdBlue lights on the Mazda CX-7?

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: AdBlue warning light

In order to reset the SCR, DPF, and AdBlue lights of the Mazda CX-7, you need to connect a diagnostic tool to the OBD port of the vehicle: this port can be found on the dashboard just below the steering column. Once the connection is established, you can select the specific car model and version, then follow the instructions on the scanner to permanently turn off the light. After the operation is completed, you can disconnect the scanner from the port and verify that the light is off.

Posted on 9 March 2025 by ScegliAuto

Video tutorial

Related tutorials

Access panel to the connectors of a Mazda CX7
Access panel to the connectors of a Mazda CX7
Mazda Cx 7 (2006-2012 / MK 1) In this video, we can see how to access the AdBlue connectors of the Mazda CX7: these connectors are used to ensure the correct functioning of the Se…
How to Reset the AdBlue Warning Light on a Mazda CX7
How to Reset the AdBlue Warning Light on a Mazda CX7
Mazda Cx 7 (2006-2012 / MK 1) To reset the SCR warning light (which corresponds to the AdBlue light), after refilling the vehicle with the required additive, get in the car, close…
How to reset the AdBlue warning light on the Mazda CX7
How to reset the AdBlue warning light on the Mazda CX7
Mazda Cx 7 (2006-2012 / MK 1) In this video we see how in some cases, the DPF light on the Mazda CX7 can be reset without using an OBD2 scanner, using a manual method that involve…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos