Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the oil indicator light on the Mazda CX 30

Model: Mazda Cx 30 , MK 1 - Years: 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Service warning light

Video tutorial

If you want to manually reset the oil light on your Mazda CX 30, just follow the procedure described in our new guide. Start by getting into the driver's seat and make sure the instrument panel is completely off, then locate the button above the fuel gauge.

Once you have found the button, press and hold it while turning on the instrument panel. Finally, wait for the oil light to reset and then release the button.


Posted on 26 October 2025 by ScegliAuto


Related tutorials

Resetting the Service Light on a Mazda CX-30
Resetting the Service Light on a Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) Below is the guide to reset the service light for the routine maintenance oil change on the Mazda CX-30. First, get into the vehicle and start the en…
How to Reset the Oil Light on the Mazda CX-30
How to Reset the Oil Light on the Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) In this new mini guide, you will discover how to reset the engine oil light on your new Mazda CX-30. First, you must start the ignition by pressing t…
How to Reset the Service Light on the 2024 Mazda CX-30
How to Reset the Service Light on the 2024 Mazda CX-30
Mazda Cx 30 (2019-2026 / , MK 1) To manually reset the service light on your Mazda CX-30 (year 2024), simply follow the steps described in the following guide. First, start the car's…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos