Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the external rear-view mirror glass

Model: Mazda 3 BM, MK 3, BN - Years 2013-2019
Part: Side mirror

In this video tutorial we will see how to replace the mirror glass of a Mazda 3, in simple steps. First we must go and turn the mirror completely, adjusting it from the inside, as shown in the video: at this point we will simply pry the sides in order to unhook and remove it; if it is chipped or shattered we will try to gently extract all the pieces of the glass, without cutting ourselves (use gloves and a plastic lever). So let's reassemble the new glass and check if all the rear hooks are intact: otherwise we will have to solve the problem before reassembling the new glass.

Posted on 9 November 2020 by ScegliAuto

Video tutorial

Related tutorials

How to replace wing mirror glass on Mazda 3
How to replace wing mirror glass on Mazda 3
Mazda 3 (2013-2019 / BM, MK 3, BN) In this short and simple guide we will see the procedure that will allow us to disassemble and replace the glass of the external rear view mirror of …
How to disassemble the external rearview mirror of the Mazda 3
How to disassemble the external rearview mirror of the Mazda 3
Mazda 3 (2003-2009 / MK 1, BK) In a few simple steps, we will see the instructions on how to disassemble and replace the external rearview mirror of the Mazda 3. First, we open the…
How to replace the external rearview mirror of the Mazda 3
How to replace the external rearview mirror of the Mazda 3
Mazda 3 (2013-2019 / BM, MK 3, BN) Today we will see the instructions that will allow us to disassemble and replace the external rearview mirror of the Mazda 3. First of all, we open t…

Removing the Timing Belt on a Suzuki Vitara

In this video, see the removal and replacement of the timing belt and water pump on a Suzuki Vitara. Open the bonnet and lift it, securing it in place. Use a socket wrench to remove the cooling radiator along with the associated hoses. Disconnect the power wiring using pliers, and remove the plastic undertray with a screwdriver. Use a spanner to loosen the tensioner pulley and slide the belt off its seat. Use a socket wrench to unscrew the tensioner pulley bolt, and remove the water pump as shown in the video. Fit the new water pump, the tensioner, and the belt itself, tightening everything with the socket wrench. Finally, reinstall the radiator with the securing bolts.

Watch the video!


by ScegliAuto

More videos