Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the tire pressure of the Mazda 3

Model: Mazda 3 MK 2, BL - Years 2009-2013
Part:

In this video we see a quick procedure to reset the tire pressure on a Mazda 3: we check the pressure of all 4 tires, and make sure they are at the values recommended by the sticker located on the driver's side door pillar. Turn on the instrument panel and look for the "reset" button, which is usually located in the small compartment under the steering wheel (on the left side) or in the center of the console (depending on the version). Here we will find a button with the inscription "TPMS" as shown in the video. Simply press and hold it for 2/3 seconds, until we see the light on the panel turn off or flash, confirming the reset. On some newer versions, the buttons on the steering wheel are used until you reach "settings/tire pressure". Here we select "reset" or "recalibrate". Then it will be necessary to drive for a few kilometers for the automatic reset.

Posted on 1 September 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure on a Mazda 3
How to Reset the Tyre Pressure on a Mazda 3
Mazda 3 (2013-2019 / MK 3, BN, BM) To reset the tyre pressure on a Mazda 3, start by adjusting the tyre pressures to the values indicated by the manufacturer (see the label on the door…
How to reset the TPMS light on the MAZDA 3
How to reset the TPMS light on the MAZDA 3
Mazda 3 (2013-2019 / MK 3, BN, BM) When the TPMS light comes on in the MAZDA 3, it is necessary to proceed with checking the pressure of all four tires. After adjusting the pressure if…
How to adjust the time in the Mazda 3?
How to adjust the time in the Mazda 3?
Mazda 3 (2013-2019 / MK 3, BN, BM) In this tutorial, we can see how to adjust the time in the Mazda 3, an extremely simple and quick operation to be carried out, for example, after rep…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos