Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Glass of the External Wing Mirror on the Mazda 3

Model: Mazda 3 MK 3, BN, BM - Years 2013-2019
Part: Side mirror

In this brief and simple guide, you will learn how to remove and replace the glass of the external wing mirror on the Mazda 3. First, approach the wing mirror and start to unclip and remove the glass from the side, being careful not to cut yourself on any glass shards; then disconnect the small connector at the back, as shown in the video. Now check the condition of the mirror supports, and install the new glass, following the video tutorial to the end!

Updated on 18 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Removing the Glass from an External Wing Mirror
Removing the Glass from an External Wing Mirror
Mazda 3 (2013-2019 / MK 3, BN, BM) In this video tutorial, you will learn how to replace the glass of a Mazda 3 wing mirror in simple steps. First, turn the mirror completely, adjustin…
How to Replace the External Wing Mirror on a Mazda 3 MK2
How to Replace the External Wing Mirror on a Mazda 3 MK2
Mazda 3 (2009-2013 / MK 2, BL) In this brief and simple guide, learn how to remove and replace the external wing mirror on a Mazda 3, second generation, following the instructions …
How to disassemble the external rearview mirror of the Mazda 3
How to disassemble the external rearview mirror of the Mazda 3
Mazda 3 (2003-2009 / BK, MK 1) In a few simple steps, we will see the instructions on how to disassemble and replace the external rearview mirror of the Mazda 3. First, we open the…

Where is the Fuel Filter Located in a Volvo XC60?

In this video, you will see where the fuel filter is located in a Volvo XC60 and how to proceed if you need to replace it. As shown, the filter is positioned at the lower part of the engine, right between the left half-shaft and the sway bar attachment. To replace the filter, first, go underneath the vehicle, taking all necessary safety precautions. Then, using an 18mm wrench, open the drain valve and allow any water present to escape. Next, unscrew the housing, remove the old filter, insert the replacement along with a new gasket, and reassemble everything.

Watch the video!


by ScegliAuto

More videos