Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the AdBlue Tank Located in the Mazda CX-7?

Model: Mazda Cx 7 MK 1 - Years 2006-2012
Part: AdBlue warning light

In this video, you will see where the AdBlue tank is located in the Mazda CX-7 and how to proceed if you need to top it up. This operation should be carried out whenever the warning light indicating a low level of fluid comes on. As shown, the tank is located in the rear left area of the vehicle, and the corresponding cap is accessible from inside the boot. To top up, simply open the tailgate, remove the floor panel, unscrew the cap, and insert the necessary amount of fluid to reach the ideal level.

Updated on 16 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the AdBlue Warning Light on the Mazda CX-7
How to Reset the AdBlue Warning Light on the Mazda CX-7
Mazda Cx 7 (2006-2012 / MK 1) This brief guide shows how to reset the missing AdBlue warning light on the Mazda CX-7; the AdBlue warning light illuminates due to the lack of fluid…
How do you top up the adblue in the Mazda CX 7?
How do you top up the adblue in the Mazda CX 7?
Mazda Cx 7 (2006-2012 / MK 1) The additive adblue is used in vehicles with diesel engines and serves to reduce their emissions. Each vehicle has a specific tank and after a certai…
How do you reset the AdBlue light on the Mazda CX-7?
How do you reset the AdBlue light on the Mazda CX-7?
Mazda Cx 7 (2006-2012 / MK 1) To reset the AdBlue light on the Mazda CX-7, you will need to perform a refill by inserting the necessary amount of additional liquid into the respec…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos