Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Rear Windshield Wiper Blade on a Mazda CX-9

Model: Mazda Cx 9 TC - Years: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Windshield wipers

See other generations:
Video tutorial

If you intend to replace the rear windshield wiper blade on this vehicle model, the following description includes the necessary references and steps for the replacement. Prepare the new wiper blades.

Disconnect the wiper arm from the glass surface until it stops. Rotate the wiper blades ninety degrees.

Remove the blade from the wiper arm. Take the new blade and attach it to the arm, then rotate it ninety degrees before lowering the arm.


Updated on 26 July 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter in the Mazda CX-9
How to Replace the Air Filter in the Mazda CX-9
Mazda Cx 9 (2016-2024 / TC) In today's video, we will see how to replace the air filter in the Mazda CX-9. First, let the vehicle cool down if it has been used to avoid unpleasa…
How to Change the Battery in a Mazda CX-9
How to Change the Battery in a Mazda CX-9
Mazda Cx 9 (2007-2015 / TB) Today, let's go through the steps to remove and replace the engine battery in a Mazda CX-9 in simple and quick steps. First, open the hood of the veh…
How to Set the Time in a Mazda CX-9?
How to Set the Time in a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) In this tutorial, you will learn how to set the time in a Mazda CX-9. This process is very simple and quick, and you may need to do it after disconne…

How to Replace the Glow Plugs in the Fiat Ducato 2.3 Multijet?

Glow plugs, as the name suggests, raise the temperature of the engine in diesel vehicles to allow for easier starting. The manufacturer, in this case, Fiat for the Ducato 2.3 Multijet, specifies how often they should be replaced, and a warning light will illuminate when it's time. This work is carried out under the bonnet. First, remove the upper engine cover, then lift the coil and, using a socket wrench of the appropriate size, unscrew the glow plug to remove it from the base, followed by installing the new one.

Watch the video!


by ScegliAuto

More videos