Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the battery of the Mazda CX-9

Model: Mazda Cx 9 TB - Years: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015
Part: Battery

See other generations:
Video tutorial

Today we will see the instructions that will allow us to disassemble and replace the battery of the Mazda CX-9 engine, in simple and quick steps. First of all, open the car's engine hood and start by disconnecting both battery terminals (positive and negative), using a star wrench; then also remove the central battery bracket, unscrewing the two nuts, as shown in the video.

At this point, remove the battery from its compartment and replace it with the new one, of the correct type and with the same amperage; secure it properly and make the connection!


Posted on 10 December 2024 by ScegliAuto


Related tutorials

How to Open the Mazda CX-9 with a Non-Working Remote
How to Open the Mazda CX-9 with a Non-Working Remote
Mazda Cx 9 (2016-2024 / TC) Learn how to open the Mazda CX-9 even with a faulty remote or a dead battery. Take your remote. At the bottom, there is a small button that, when pre…
How to replace the battery of the Mazda CX 9 key.
How to replace the battery of the Mazda CX 9 key.
Mazda Cx 9 (2016-2024 / TC) In this new guide aimed at all of you who own a second generation Mazda CX 9, we will explain how you can quickly and safely replace the key battery.…
How to Replace the Battery in a Mazda CX-9?
How to Replace the Battery in a Mazda CX-9?
Mazda Cx 9 (2016-2024 / TC) To replace the battery in a Mazda CX-9, open the hood to access the components inside the engine compartment. The battery is located on the right sid…

How to Remove the Toll Tag Holder from the Car Windscreen

The toll tag holder is usually attached to the car windscreen to ensure that the toll tag functions immediately when passing through barriers. However, if you decide to remove the holder, you should follow this procedure: - Insert the toll tag into the holder; - Pull the holder inwards to detach it from the windscreen; you can use a glass scraper or a stiff plastic card to assist you; After removing the holder, it is essential to remove the adhesive from the windscreen. To remove the adhesive, we recommend using a solvent-based spray that will remove the glue without clouding the area.

Watch the video!


by ScegliAuto

More videos