Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Installation of LED Interior Lights

Model: Mazda Rx 8 MK 1 - Years 2003-2012
Part: Interior dome light bulb

Replacing the original interior lights with LED ones will give the vehicle a much more modern and appealing look, as well as objectively improving its brightness; you can purchase the appropriate kit that contains all the bulbs needed for the upgrade. Start with the interior light by opening the sunglasses compartment to remove the fixing screws, then lever along the edges to detach it from the headlining, disconnecting the corresponding power connector. Next, extract the bulb holder and replace the bulb (T10 fitting); continue with the vanity lights under the sun visors, the courtesy lights in the doors, the rear interior light, the one inside the boot, and finally the number plate light.

Updated on 21 February 2026 by ScegliAuto

Video tutorial

Related tutorials

Replace Rear Light Stop Lens with LED
Mazda Rx 8 (2003-2012 / MK 1) To replace the lens, you only need a screwdriver and a ratchet spanner. To replace the lens, the entire light assembly must be removed. The screws ar…
Improving Engine Performance
Improving Engine Performance
Mazda Rx 8 (2003-2012 / MK 1) AccessPort Manager is used to transfer maps from your computer to your AccessPort. Installing this kit is very simple; connect the supplied cable bet…
Temperature Control Kit
Temperature Control Kit
Mazda Rx 8 (2003-2012 / MK 1) The tool that shows us the guide today is the most effective for reducing engine temperature. It is a product that modifies the ventilation of the co…

How to Remove the Rear Bumper of an Opel Corsa

How to remove the rear bumper of an Opel Corsa? Follow these steps carefully. This operation is not too complex if done in order. First, use a screwdriver or battery-powered drill to unscrew the securing screws located near the rear lights, then remove them from the body along with their connectors. Unscrew the screws located at the top of the bumper, then unscrew the screws on the sides of the wheel arch liners and at the bottom of the bumper. Once the bumper is free from any screws or pins, grasp it with your hands and pull it away from the body (disconnect any power cables if necessary).

Watch the video!


by ScegliAuto

More videos