Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What to Do If the Tyre Pressure Warning Light Does Not Turn Off on a Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

If the tyre pressure warning light does not turn off on a Mazda CX-5, there are two scenarios: if the vehicle has a specific button for the TPMS, the system is indirect; there are no sensors on the wheels, but it uses the ABS sensors to detect if a wheel is spinning differently.

Inflate all tyres to the recommended pressure, turn on the ignition, and hold the TPMS button until the light turns off. On newer models, there are direct sensors inside each wheel.

Check the tyre pressures, then turn on the ignition and press the button twice: wait 10 seconds and then turn off the ignition. Wait 15 minutes, then start the engine and drive for 10 minutes at a speed above 25 mph to allow the sensors to recalibrate.


Posted on 24 February 2026 by ScegliAuto


Related tutorials

How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to Reset the Tyre Pressure Warning Light on a Mazda CX-5
How to Reset the Tyre Pressure Warning Light on a Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) To completely reset the warning light indicating a tyre pressure anomaly on your Mazda CX-5, the procedure is very simple and quick. As shown in the …
How to reset the TPMS light on the 2019 Mazda CX-5
How to reset the TPMS light on the 2019 Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) Today we will explain how to reset the tire pressure warning light on a 2019 Mazda CX 5 vehicle. To reset the warning light, we need to press the INF…

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos