Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the Tyre Pressure Warning Light on a Mazda CX-5

Model: Mazda CX-5 MK 1, KE - Years 2012-2017
Part:

To completely reset the warning light indicating a tyre pressure anomaly on your Mazda CX-5, the procedure is very simple and quick. As shown in the video, on the left side of the steering wheel, you will notice a series of buttons, including one with the same symbol as the warning light and the word "set" underneath. Once you find that button, press it until the warning light on the dashboard disappears. As always, it is important to remember that if the light does not go out, you should have the vehicle checked by an expert to avoid serious damage and dangers.

Posted on 7 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the tyre pressure warning light on the Mazda CX-5?
How to reset the tyre pressure warning light on the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) To reset the tyre pressure warning light, first inflate the tyres until they reach the pressure indicated on the sticker on the driver's door pillar.…
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
How to Reset the Tyre Pressure Warning Light on the Mazda CX-5?
Mazda CX-5 (2017-2024 / MK 2) When a tyre (or more than one) has a pressure that is too low compared to the standard, whether due to a puncture or simply being deflated, the tyre …
How to reset the tire pressure light in the Mazda CX-5?
How to reset the tire pressure light in the Mazda CX-5?
Mazda CX-5 (2012-2017 / MK 1, KE) In this tutorial we can see how to reset the tire pressure light in the Mazda CX-5, an extremely simple and quick operation, to be performed only onc…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos