Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Where is the OBD2 port on the Mazda CX-5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Dashboard

In this new guide dedicated to all of you who own a second-generation Mazda CX-5, we will discover where the OBD2 port is located, allowing you to connect any compatible diagnostic tool using a specific cable. First, open the driver's side door and enter the vehicle. Next, locate the OBD2 port situated at the lower part of the dashboard, specifically on the left side. Once found, you can finally connect the diagnostic tool to identify and/or resolve errors in the ECU.

Updated on 7 September 2026 by ScegliAuto

Video tutorial

Related tutorials

Where is the OBD2 port located in the Mazda CX 5?
Where is the OBD2 port located in the Mazda CX 5?
Mazda CX-5 (2012-2017 / MK 1, KE) The OBD2 port on a Mazda CX 5 vehicle is located inside the cabin. The OBD2 port is used for performing diagnostics, correcting error codes, resettin…
How to Replace the Cabin Filter on a 2014 Mazda CX-5
How to Replace the Cabin Filter on a 2014 Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) If you own a first-generation 2014 Mazda CX-5 and are wondering how to replace the cabin air filter, read this guide and follow the steps described. …
Control and storage of tire pressure on Mazda CX5
Control and storage of tire pressure on Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this video we can see how to check and then store the tire pressure on our Mazda CX5: first we check the correct pressure on the plate located on …

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos