Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Control and storage of tire pressure on Mazda CX5

Model: Mazda CX-5 MK 2 - Years 2017-2024
Part: Tires

In this video we can see how to check and then store the tire pressure on our Mazda CX5: first we check the correct pressure on the plate located on the driver's side door frame. Using a compressor with a pressure gauge, we check each wheel, making sure the pressure of each tire is correct, and adding or removing air where necessary. To store the correct tire pressures, Mazda CX 5 does not require complex procedures or reset buttons: it will be enough to drive a few kilometers for the vehicle to learn the new pressures and set them as reference.

Posted on 27 August 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Cabin Filter on a 2014 Mazda CX-5
How to Replace the Cabin Filter on a 2014 Mazda CX-5
Mazda CX-5 (2012-2017 / MK 1, KE) If you own a first-generation 2014 Mazda CX-5 and are wondering how to replace the cabin air filter, read this guide and follow the steps described. …
How to Reset the Maintenance Light on Mazda CX5
How to Reset the Maintenance Light on Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) This brief guide will show you the procedure to reset the maintenance light on your Mazda CX5, second generation, produced from 2017 to 2023. First, …
How to Activate the Tyre Rotation Warning on the Mazda CX5
How to Activate the Tyre Rotation Warning on the Mazda CX5
Mazda CX-5 (2017-2024 / MK 2) In this video, you will learn how to activate the tyre rotation warning light on the Mazda CX5: to do this, use the buttons on the left side of the s…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos