Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the TPMS light on the 2019 Mazda CX-5

Model: Mazda CX-5 MK 2 - Years: 2017, 2018, 2019, 2020, 2021, 2022, 2023, 2024
Part: Tire pressure warning light

See other generations:
Video tutorial

Today we will explain how to reset the tire pressure warning light on a 2019 Mazda CX 5 vehicle. To reset the warning light, we need to press the INFO button located on the left side of the dashboard.

Scroll down to select the "tpms" option. Hold down the OK button for a few seconds to start the tire pressure update.

By following these steps, the reset warning message will be cleared. If the message continues to appear on the display and the light does not turn off, it means that it is necessary to go to the workshop to check the tire sensors.


Posted on 11 October 2025 by ScegliAuto


Related tutorials

How to Reset the TPMS Light on a 2019 Mazda CX-5
How to Reset the TPMS Light on a 2019 Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) The TPMS light, related to tyre pressure, must be reset only after checking the tyre pressures. To reset the TPMS light on a 2019 Mazda CX-5, first s…
How to Reset the Tyre Pressure Light in the Mazda CX-5
How to Reset the Tyre Pressure Light in the Mazda CX-5
Mazda CX-5 (2017-2024 / MK 2) In this guide, you will discover the instructions that will allow you to reset the tyre pressure light in the Mazda CX-5; before performing the reset…
How to reset the TPMS light on the 2021 Mazda CX 5
How to reset the TPMS light on the 2021 Mazda CX 5
Mazda CX-5 (2017-2024 / MK 2) Performing the tire pressure warning light reset on a 2021 Mazda CX5 is a simple and quick operation that can be done independently. To reset it, we …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos