Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Mercedes Classe B - Seat

Seat Mercedes Classe B (2011-2019 / w 246, mk 2)

Mercedes Classe B (2011-2019 / W246, MK 2)
How to Fold Down the Rear Seats of a Mercedes-Benz B-Class?
To fold down the rear seats of a Mercedes-Benz B-Class, open the boot and pull the levers located at the back of the seats in the third row. This will allow …Read all…
Posted on 1 June 2026 by ScegliAuto
Airbag (4) Alternator (1) Antenna (1) Car stereo (8) Roof rack bars (3) Battery (19) Air vents (1) Control arm (1) Transmission (5) Spark plugs (4) Glow plugs (3) Body (3) Control unit (1) Key (30) Timing belt (4) V-belt (6) Onboard computer (10) Checks and maintenance (26) Dashboard (1) Bearing (1) Brake rotors (1) Headlight (5) Tail light (2) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel fuel filter (2) Oil filter (2) Fuel injectors (4) Window switch (1) Accessory kit (1) Light bulb (4) Headlight bulb (10) Tail light bulb (8) Antifreeze coolant (3) Handle (5) Engine (1) Starter motor (7) Transmission fluid (5) Engine oil (7) Clock (17) Door trim panel (5) Windshield (1) Front bumper (4) Rear bumper (4) Brake pads (1) Tires (3) Shift knob (1) Pump (2) Fuel pump (1) Car door (1) Power window switch (3) Instrument cluster (5) Heater core (1) Wheel (1) Fuse box (47) Seat (1) Door lock (4) Side mirror (7) Warning light – error code (27) (25) Tire pressure warning light (12) Service warning light (86) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (5) Thermostat (5) Center console tunnel (2) Valve (1) EGR valve (1) Blower motor (5) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos