Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe B
  6. : Blower motor

Mercedes Classe B - Blower motor

Blower Motor Mercedes Classe B (2005-2011 / w 245, mk 1)

Mercedes Classe B (2005-2011 / W245, MK 1)
Guide to Replacing the Cabin Fan on a Mercedes-Benz B-Class

Below are the main steps that will allow you to remove and replace the cabin fan of the Mercedes-Benz B-Class, as well as the A-Class. First, get inside the …Read all…
Posted on 13 July 2026 by ScegliAuto
Mercedes Classe B (2005-2011 / W245, MK 1)
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class

This guide outlines the procedure for removing and replacing the cabin fan resistor on a Mercedes-Benz B-Class, as well as the A-Class. First, get inside the …Read all…
Posted on 13 July 2026 by ScegliAuto
Mercedes Classe B (2005-2011 / W245, MK 1)
How to Remove the Cabin Air Fan from the Mercedes B-Class W245

This guide shows how to remove the cabin air fan. The first step is to remove the glove compartment using the Torx screws located in and under the compartment. …Read all…
Posted on 23 May 2026 by ScegliAuto
Mercedes Classe B (2005-2011 / W245, MK 1)
Removing the Electrical Module from a Mercedes B-Class

Remove the electric module from inside the dashboard of the Mercedes B-Class. Open the glove compartment door, unscrew the screws above the mounting bar, and …Read all…
Posted on 24 April 2026 by ScegliAuto
Mercedes Classe B (2005-2011 / W245, MK 1)
Replacing the Fan Resistor on a Class B

Replacing the fan resistor in your car? Remove the fan resistor on the Class B. Disconnect the cover located at the bottom of the centre tunnel, and locate the …Read all…
Posted on 24 April 2026 by ScegliAuto

Airbag (4) Alternator (1) Antenna (1) Car stereo (8) Roof rack bars (3) Battery (19) Air vents (1) Control arm (1) Transmission (5) Spark plugs (4) Glow plugs (3) Body (3) Control unit (1) Key (30) Timing belt (4) V-belt (6) Onboard computer (10) Checks and maintenance (26) Dashboard (1) Bearing (1) Brake rotors (1) Headlight (5) Tail light (2) Fog lights (3) Air filter (4) Cabin air filter (9) Diesel fuel filter (2) Oil filter (2) Fuel injectors (4) Window switch (1) Accessory kit (1) Light bulb (4) Headlight bulb (10) Tail light bulb (8) Antifreeze coolant (3) Handle (5) Engine (1) Starter motor (7) Transmission fluid (5) Engine oil (7) Clock (17) Door trim panel (5) Windshield (1) Front bumper (4) Rear bumper (4) Brake pads (1) Tires (3) Shift knob (1) Pump (2) Fuel pump (1) Car door (1) Power window switch (3) Instrument cluster (5) Heater core (1) Wheel (1) Fuse box (47) Seat (1) Door lock (4) Side mirror (7) Warning light – error code (27) (25) Tire pressure warning light (12) Service warning light (86) Manufacturer emblem (1) Fuel cap (2) Windshield wipers (5) Thermostat (5) Center console tunnel (2) Valve (1) EGR valve (1) Blower motor (5) Steering wheel (4)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos