Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Cabin Air Fan from the Mercedes B-Class W245

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Blower motor

See other generations:
Video tutorial

This guide shows how to remove the cabin air fan. The first step is to remove the glove compartment using the Torx screws located in and under the compartment. Be careful to also unscrew a screw on the outer side of the compartment, protected by a plastic cover.

At this point, you can pull out the compartment, taking care to disconnect the light power supply. You will then see the air fan on the left side of the space.

The fan is held in place by one screw, and once this is removed, you need to rotate the block to the left to take it out. Ensure you have disconnected the power supply to the fan before removing the part. You can now refit the new fan by following the steps completed so far.


Updated on 15 April 2026 by ScegliAuto


Related tutorials

Removing the Fan Resistor on a Mercedes-Benz B-Class
Removing the Fan Resistor on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) This brief and simple guide shows how to remove and replace the cabin fan resistor on a Mercedes-Benz B-Class, as well as on the A-Class. First, get …
Cabin Air Filter Replacement on Mercedes Classe B W245
Cabin Air Filter Replacement on Mercedes Classe B W245
Mercedes Classe B (2005-2011 / MK 1, W245) In this video tutorial, you will see how to disassemble and replace the cabin air filter or pollen filter on a Mercedes Benz Classe B W245. First, op…
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
Mercedes Classe B (2005-2011 / MK 1, W245) This guide outlines the procedure for removing and replacing the cabin fan resistor on a Mercedes-Benz B-Class, as well as the A-Class. First, get in…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos