Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Disassembly of the glove compartment drawer of the Mercedes A-Class

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Glove compartment

Today we will see the instructions that will allow us to disassemble and replace the glove box drawer of the Mercedes Classe A. First, we open the front door of the passenger and start removing the plastic side cover of the dashboard; then we unscrew the screws of the glove box drawer, opening it and also removing the lower cover, as shown in the video. At this point, disconnect the electrical connector of the glove box drawer light bulb, in order to remove it; replace it with the new one or repair it, applying the reverse procedure for reassembly!

Posted on 19 October 2025 by ScegliAuto

Video tutorial

Related tutorials

Removing Dashboard on Mercedes A-Class
Removing Dashboard on Mercedes A-Class
Mercedes Classe A (1997-2004 / W168) .. how to remove the dashboard of the Mercedes A-Class, model years 1997-2004. The process can be quite tedious and complicated as many Mercedes vehicles.. …
How to Remove the Rear Bumper of a Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. you begin, open the trunk of your Mercedes A-Class. Start by removing the covers from the bolts that secure the bumper. Once done, proceed to unscrew.. …
Removing EGR Valve on Mercedes A-Class
Removing EGR Valve on Mercedes A-Class
Mercedes Classe A (2004-2012 / W169) .. Removing the EGR valve on a Mercedes A-Class? Let's see how to remove the faulty part from inside the engine compartment. Lift the hood and.. …

Other guides you may be interested in

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos