Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Dashboard on a Mercedes A-Class W177

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Dashboard

See other generations:
Video tutorial

In today's video, you will see step-by-step instructions on how to remove the dashboard from a Mercedes A-Class W177, fourth generation. First, get inside the vehicle and lower the steering column; then disconnect the battery terminals.

Now, remove the upper pillars by prying the sides with a thin lever, and take out the airbag along with the control unit. After disconnecting all the electrical connectors, remove the plastic side covers and the turn signal switch panel; then disassemble the air conditioning unit and the glove compartment by unscrewing the screws located underneath: follow the video to the end for complete disassembly!


Updated on 17 April 2026 by ScegliAuto


Related tutorials

Replacing Diesel Filter on Mercedes A-Class W177
Replacing Diesel Filter on Mercedes A-Class W177
Mercedes Classe A (2018-2026 / W177) .. and replace the diesel filter on a Mercedes A-Class W177. First, lift the vehicle and use a wrench to remove the screws from the indicated aluminum.. …
How to solve the problem of the SRS warning light on the Mercedes A-Class W177
How to solve the problem of the SRS warning light on the Mercedes A-Class W177
Mercedes Classe A (2018-2026 / W177) .. of the SRS warning light on the Mercedes A-Class W177, B-Class W247, and CLA W118. In this case, false contacts are created and we need to clean.. …
Remove the Rear Hatch Panel on Mercedes A-Class W177
Remove the Rear Hatch Panel on Mercedes A-Class W177
Mercedes Classe A (2018-2026 / W177) .. remove the rear hatch panel on a Mercedes Benz A-Class W177. First, open the trunk hatch and remove the plastic caps with a thin lever, then unscrew the.. …

Other guides you may be interested in

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos