Do it yourself
Frequently asked questions about cars and motorcycles

Remove the Rear Hatch Panel on Mercedes A-Class W177

Model: Mercedes Classe A W177 - Years 2018-2026
Part: Door trim panel

Today, you will see the instructions on how to remove the rear hatch panel on a Mercedes Benz A-Class W177. First, open the trunk hatch and remove the plastic caps with a thin lever, then unscrew the fastening screws located underneath. Next, disconnect the clips found inside the handles using needle-nose pliers, as shown in the video. At this point, disconnect the electrical connector of the lock and pry on the sides of the panel to remove it; apply the reverse procedure for reassembly!

Updated on 13 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Mercedes Classe A (2018-2026 / W177) .. the battery in the key fob for the Mercedes A-Class W177, as well as the B-Class and vehicles from this manufacturer from 2018 onwards. First, take.. …
Mercedes Classe A (2018-2026 / W177) The disassembly of the rear light of the Mercedes Classe A w177, a car that can be seen in the video uploaded here, generally follows the operating s…
Mercedes Classe A (2018-2026 / W177) .. If you own a Mercedes A-Class W177 and are looking for a simple and effective guide to help you find the OBD2 port of your car,.. …

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos