Do it yourself
Frequently asked questions about cars and motorcycles

What to Do if the Fuel Door of the Mercedes A-Class W177 is Stuck

Model: Mercedes Classe A W177 - Years: 2018, 2019, 2020, 2021, 2022, 2023, 2024, 2025, 2026
Part: Fuel cap

See other generations:
Video tutorial

In this video, see what to do if the fuel door of your Mercedes A-Class W177 is stuck: the culprit is the actuator responsible for opening the door. There is a way to unlock the actuator, but it's nearly impossible to know how without removing the entire lock from the door, and to do that, you need to cut it off because there are no screws.

Once you have it in hand, you'll find that there is actually an unlock button, which is invisible and unreachable with the actuator installed. Even knowing this - and knowing how to do it - you still need to remove the trunk carpet from the side of the door (don't disassemble half the car like the YouTuber did). If you want to remove the actuator without damaging the car, once the little door is open, all you have to do is push up the tab that the YouTuber shows, and the actuator will come out.


Updated on 9 October 2026 by ScegliAuto


Related tutorials

Mercedes Classe A (2012-2018 / W176) Before you begin, open the trunk of your Mercedes A-Class. Start by removing and lowering the left side inner cover. Next, remove the first aid kit l…
Mercedes Classe A (2018-2026 / W177) In order to replace the fuel door of the Mercedes Classe A, it will be necessary to open it by pressing the appropriate button located inside the cab…
Mercedes Classe A (2018-2026 / W177) To refill AdBlue in the Mercedes A-Class, open the fuel filler door located on the left rear of the vehicle. Once the door is open, you will find a b…

    Frequently Asked Questions

    • Classe A 2012-2018 - What can I do if the fuel flap of the Mercedes A-Class gets stuck? Read answer

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos