Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Cabin Fan on a Mercedes-Benz B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Blower motor

See other generations:
Video tutorial

Below are the main steps that will allow you to remove and replace the cabin fan of the Mercedes-Benz B-Class, as well as the A-Class. First, get inside the vehicle and start by removing the plastic cover located under the driver's side, above the pedal area; then unscrew the fixing screws of the fan, disconnecting the wiring to remove it and replace it with the new one (using the original replacement), as shown in the video.

At this point, install the new fan correctly, following the video to the end!


Updated on 13 July 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. replacing the cabin fan resistor on a Mercedes-Benz B-Class, as well as the A-Class. First, get inside the vehicle and unscrew the fixing screws located.. …
Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. of replacing the timing belt on the Mercedes-Benz B-Class. Firstly, the timing belt should generally be replaced around 62,000 miles for both petrol.. …
Guide to replacing the injectors on a Mercedes B-Class
Guide to replacing the injectors on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. and replace the fuel injectors on a Mercedes B-Class. First, open the bonnet and start by removing the air filter box, disconnecting the intake hose.. …

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos