Do it yourself
| ||||
|
Mercedes Classe B - Video tutorial
Model: Mercedes Classe B
MK 1, W245
- Years 2005-2011 Today's guide will show us the main steps that will allow us to disassemble and replace the fuel injectors of the Mercedes Classe B. First, we open the hood and start disassembling and removing the air filter box, disconnecting the intake hose and unscrewing the fixing screws; then we also disassemble the EGR valve, as shown in the video. At this point, we remove the injector rail, then disassemble the individual injector; clean it or replace it directly if it is faulty, applying the reverse procedure for reassembly!
Posted on 12 April 2024 by ScegliAuto
Other guides that may interest you
|
Frequently Asked QuestionsHow to reset the tire pressure warning light on Dacia Sandero?Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.033
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |