Do it yourself
Frequently asked questions about cars and motorcycles
  1. Car
  2. :
  3. Mercedes
  4. :
  5. Classe B
  6. : Removal of the EGR valve on Mercedes B-Class w245

Mercedes Classe B - Video tutorial

Model: Mercedes Classe B MK 1, W245 - Years 2005-2011
Part: Valve
Operation: Removal of the EGR valve on Mercedes B-Class w245

Raise the hood and secure it. Uncover the engine air filter using a t25 torx wrench and removing the cover from the tube. Unlock and remove the fuel filter, so you can move it as shown in the video. Undo all bolts securing the engine air filter compartment and remove it. Proceed at this point to disassemble the fixing elements of the EGR valve, which is located between the intake and exhaust manifolds: the whole procedure is well shown in the video, please note that you must disassemble all the equipment inside of which this valve is located and that, if you notice that the intake manifold is particularly dirty, this is due precisely to the malfunction of this valve.


Posted on 10 February 2024 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • Classe B 2011-2019 - What problems does the EGR valve of the Mercedes B-Class have? Read Answer

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos