Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to disassembling the engine of the Mercedes B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Engine

In this guide we will see the instructions that will allow us to disassemble and remove the entire engine block of the Mercedes Class B. First, we lift the vehicle and start by removing the front wheels; then we remove the bumper, unscrewing all the fixing screws, as shown in the video. At this point we remove the front part of the frame and disconnect the various pipes and wiring; we disconnect the front suspensions and half-shafts, then remove the engine mounts. We use a jack to keep the engine block lifted, and proceed with its removal.

Posted on 6 September 2025 by ScegliAuto

Video tutorial

Related tutorials

Disassembling the Centre Console or Tunnel of a Mercedes Class B
Disassembling the Centre Console or Tunnel of a Mercedes Class B
Mercedes Classe B (2005-2011 / W245, MK 1) .. the centre console or tunnel of a Mercedes Class B. First, get in the vehicle and start removing the cover located at the base of the gear lever;.. …
How to replace the thermostat of the Mercedes B-Class
How to replace the thermostat of the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the thermostat of the Mercedes Class B with a diesel engine. First of all, we open the hood of the car and start disassembling and removing.. …
Guide to replacing injectors in the Mercedes B-Class
Guide to replacing injectors in the Mercedes B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. and replace the fuel injectors of the Mercedes Classe B. First, we open the hood and start disassembling and removing the air filter box, disconnecting.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos