Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Mount on a Mercedes E-Class?

Model: Mercedes Classe E W211 - Years 2002-2009
Part: Engine mount

To replace the engine mount on a Mercedes E-Class, first open the hood to locate the mounts at the top. Loosen the bolt at the mount, lift the vehicle, and remove the screws securing the protection panel at the bottom of the engine compartment. Next, remove the additional screw located at the mount, ensuring to hold the engine in position using a jack. This will allow you to remove the old mount, connect the new one with the bolts, and secure the engine again.

Updated on 22 August 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Engine Mount on the Mercedes E-Class W211
Replacing the Engine Mount on the Mercedes E-Class W211
Mercedes Classe E (2002-2009 / W211) .. replace the engine mount on the Mercedes Benz E-Class W211 by following these simple steps. First, open the hood and locate the right engine mount, which.. …
How to Replace the Engine Mount on a Mercedes E-Class?
How to Replace the Engine Mount on a Mercedes E-Class?
Mercedes Classe E (2002-2009 / W211) .. To replace the engine mount on a Mercedes E-Class, lift the vehicle and secure the engine in position using another jack. Once the engine is secured,.. …
How do you replace the thermostat of the Mercedes E-Class?
How do you replace the thermostat of the Mercedes E-Class?
Mercedes Classe E (2009-2016 / W212) .. to replace the thermostat of the Mercedes E-Class, you need to open the hood so that you can access the components located inside the engine compartment:.. …

Other guides you may be interested in

How to Repair the Key Spring of the Peugeot 207?

Over time, frequent use of the key's flip mechanism in the vehicle, dozens of times a day, inevitably leads to wear of the internal spring. As shown in this video, replacing the spring is quite simple and takes little time. After opening the casing halfway, first position the key, then the spring housing, and finally insert the spring into the previously mentioned housing. Close the casing by rotating it clockwise, ensuring all components fit perfectly, and test the key's flip mechanism.

Watch the video!


by ScegliAuto

More videos