Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the injectors of the Mercedes Class B 180 CDI

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel injectors

See other generations:
Video tutorial

The main instructions in this guide will show us how to disassemble and replace the diesel injectors of the Mercedes Classe B 180 CDI. First, we open the hood of the car and start disassembling and removing the air filter box, unscrewing the fixing screws; then we remove the injector cover, disconnecting the connector and removing the faulty injector (or all injectors), as shown in the video.

At this point, we replace the injector, installing the original one, following the video tutorial until the end!


Posted on 1 September 2025 by ScegliAuto


Related tutorials

Replacing the Diesel Filter of the Mercedes B-Class CDI
Replacing the Diesel Filter of the Mercedes B-Class CDI
Mercedes Classe B (2011-2019 / MK 2, W246) Today, we will see in this video tutorial how to remove and replace the diesel filter of the Mercedes B-Class CDI. First, open the bonnet of your car…
How do you disassemble the starter motor of a Mercedes B-Class 180 cdi?
How do you disassemble the starter motor of a Mercedes B-Class 180 cdi?
Mercedes Classe B (2005-2011 / MK 1, W245) The symptoms of a malfunctioning car starter motor are very clear, you can feel a real slipping of the same, a consequence of the wear of the brushes…
How to Reset the Tyre Pressure Light on a Mercedes-Benz B-Class 180?
How to Reset the Tyre Pressure Light on a Mercedes-Benz B-Class 180?
Mercedes Classe B (2011-2019 / MK 2, W246) Maintaining the correct tyre pressure on your vehicle prevents the tyre warning light from illuminating, regardless of the car model. For the Mercede…

How to open the bonnet on a Volkswagen Golf?

In this tutorial, you will see how to open the bonnet on a Volkswagen Golf MK4. This is a very simple operation that follows the standard procedure. First, open the driver's door, then locate the lever in the lower left area and pull it. Next, move to the front of the vehicle, lift the bonnet slightly, and find the second lever located just above the Volkswagen logo. At this point, simply pull it towards you, fully open the bonnet, and secure it with the prop rod. To close it, gently push it down.

Watch the video!


by ScegliAuto

More videos