|
Do it yourself
| |||
| ||||
How to Reset the Tyre Pressure Light on a Mercedes-Benz B-Class 180?
Model: Mercedes Classe B
MK 2, W246
- Years:
2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019
Video tutorial
Maintaining the correct tyre pressure on your vehicle prevents the tyre warning light from illuminating, regardless of the car model. For the Mercedes-Benz B-Class 180, you can reset the tyre warning light provided the tyres are inflated: after turning on the ignition, use the steering wheel arrow buttons to access the Settings, select Maintenance, Tyres, and confirm the Reset with OK. At this point, turn off and then turn on the ignition again to confirm the warning light has been extinguished.
Posted on 19 July 2026 by ScegliAuto
Related tutorials
Mercedes Classe B
(2011-2019 /
MK 2, W246)
.. to reset the tyre pressure light on the Mercedes-Benz B-Class; before executing the reset, ensure that all four tyres are at the correct operating pressure... …
Mercedes Classe B
(2005-2011 /
MK 1, W245)
To reset the tyre pressure warning light on the Mercedes B-Class, turn on the ignition by inserting the key into the ignition switch: once the dashbo…
Mercedes Classe B
(2005-2011 /
MK 1, W245)
.. the tyre pressure warning light on a Mercedes-Benz B-Class, first inflate the tyres to the recommended pressure value, which is indicated on the sticker.. …
Other guides you may be interested in
|
How to Extract the Spare Wheel from a Mercedes Vito
The spare wheel of a Mercedes Vito is located underneath the vehicle, just below the rear boot. This video demonstrates how to extract the wheel from its compartment. First, open the boot and locate the tools provided with the vehicle to release the wheel; these can be found in a compartment on the right side of the boot. As shown in the video, use the supplied screwdriver to remove the cover cap from the hole where you will insert the socket spanner; this hole is located beneath the rubber seal above the rear bumper. Insert the spanner and attach the extension to allow you to turn it and lower the wheel from under the floor. Finally, detach the pin that allowed the wheel to lower and proceed to extract it from under the vehicle. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.024
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
