Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Removing the Injectors on the Mercedes Class B 2.0 L

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Fuel injectors

See other generations:
Video tutorial

In today's tutorial video, you will learn how to remove and replace the fuel injectors on the Mercedes Class B 2.0 L, following the instructions below. First, open the bonnet and start removing the intake hose connected to the throttle body; unscrew the screws of the intake duct to remove it, allowing access to the injectors, as shown in the video.

At this point, disconnect the electrical connectors and use a socket spanner with an extension to unscrew and replace the injectors with new ones, following the video to the end!


Updated on 30 June 2026 by ScegliAuto


Related tutorials

How to Clean the Injectors on a Mercedes B-Class
How to Clean the Injectors on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) In this video, we will show you how to clean the injectors on a Mercedes B-Class. Lift the bonnet and secure it with the prop, then disconnect the fu…
How to replace the injectors of the Mercedes Class B 180 CDI
How to replace the injectors of the Mercedes Class B 180 CDI
Mercedes Classe B (2005-2011 / MK 1, W245) The main instructions in this guide will show us how to disassemble and replace the diesel injectors of the Mercedes Classe B 180 CDI. First, we open…
Guide to replacing the injectors on a Mercedes B-Class
Guide to replacing the injectors on a Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) Today's guide will show you the main steps to disassemble and replace the fuel injectors on a Mercedes B-Class. First, open the bonnet and start by r…

Other guides you may be interested in

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos