Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Open the Bonnet of the Mercedes-Benz B-Class

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Body

See other generations:
Video tutorial

In this short and simple guide, you will see the steps on how to open the bonnet of the Mercedes-Benz B-Class, following the instructions below. First, open the front door and start pulling the red lever found at the bottom, above the pedal area; then move to the front of your car and release the latch located in the centre (between the bonnet and the bumper), as shown in the video.

At this point, secure the stay on the bonnet to keep it open; then lower the bonnet to close it!


Updated on 18 August 2026 by ScegliAuto


Related tutorials

How to Top Up the Coolant on a Mercedes-Benz B-Class
How to Top Up the Coolant on a Mercedes-Benz B-Class
Mercedes Classe B (2011-2019 / MK 2, W246) .. starting, open the bonnet of your Mercedes-Benz B-Class. First, unscrew and remove the upper cap of the expansion tank. At this point, insert the.. …
Where to Find the OBD Port on a Mercedes-Benz B-Class W246
Where to Find the OBD Port on a Mercedes-Benz B-Class W246
Mercedes Classe B (2011-2019 / MK 2, W246) .. the OBD port inside the cabin of your Mercedes-Benz B-Class W246. First, open the driver's door and get inside the vehicle, ensuring it is completely.. …
How to Replace the Position Lights on a Mercedes-Benz B-Class
How to Replace the Position Lights on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) .. to replace the position bulbs in the Mercedes-Benz B-Class. First, ensure the engine is cold to avoid burns. Open the bonnet. Remove the fluid reservoir.. …

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos