Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Position Lights on a Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Light bulb

In today's video, learn how to replace the position bulbs in the Mercedes-Benz B-Class. First, ensure the engine is cold to avoid burns. Open the bonnet. Remove the fluid reservoir in front of you. Next, take off the cover cap and disconnect the power connector. Extract the old bulb. Insert the new unit and check if it works correctly. Once done, reassemble everything properly, following the steps outlined earlier.

Updated on 24 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Locate the Fuses in a Mercedes-Benz B-Class and Understand the Diagrams
How to Locate the Fuses in a Mercedes-Benz B-Class and Understand the Diagrams
Mercedes Classe B (2005-2011 / W245, MK 1) .. will see how to locate the fuses in a Mercedes-Benz B-Class from the years 2006-2008. The fuse box is located under the panel on the floor, at the base.. …
How to replace the windshield wipers on the Mercedes B-Class?
How to replace the windshield wipers on the Mercedes B-Class?
Mercedes Classe B (2005-2011 / W245, MK 1) .. to replace the windshield wipers in the Mercedes Classe B, an extremely simple and quick operation. First of all, make sure that all the windshield wipers.. …
Replace the External Mirror Bulb on Mercedes B-Class 180
Replace the External Mirror Bulb on Mercedes B-Class 180
Mercedes Classe B (2005-2011 / W245, MK 1) .. bulb in the external mirror of the Mercedes B-Class 180, first ensure the vehicle is parked securely on a flat surface or ramp. Position the mirror.. …

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos