Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Timing belt

Replacing the timing belt is a complex operation that requires time and patience; this guide will outline some important information to assist you in the process of replacing the timing belt on the Mercedes-Benz B-Class. Firstly, the timing belt should generally be replaced around 62,000 miles for both petrol and diesel engines; to carry out the replacement, it is necessary to remove the engine block from the chassis to work on the timing system. Take the necessary references that will allow you to install and subsequently phase the engine.

Updated on 4 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Timing Belt on the Mercedes A-Class and B-Class
How to Replace the Timing Belt on the Mercedes A-Class and B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. how to replace the timing belt on the Mercedes A-Class and B-Class. First, lift the car and remove the right wheel and the corresponding wheel arch liner... …
How to Replace the Timing Belt on a Mercedes-Benz B-Class
How to Replace the Timing Belt on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. To replace the timing belt on a Mercedes-Benz B-Class, open the bonnet and disconnect the negative terminal of the battery. Raise the vehicle.. …
When to replace the timing belt of the Mercedes B-Class
When to replace the timing belt of the Mercedes B-Class
Mercedes Classe B (2011-2019 / W246, MK 2) .. to replace the timing belt of a Mercedes Classe B according to the time period, even if the car has not reached the mileage required for the belt.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos