Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Timing Belt on the Mercedes A-Class and B-Class

Model: Mercedes Classe B W245, MK 1 - Years 2005-2011
Part: Timing belt

Today, with the help of this video tutorial, you will learn how to replace the timing belt on the Mercedes A-Class and B-Class. First, lift the car and remove the right wheel and the corresponding wheel arch liner. Next, remove the engine block, then attach the tensioner bolt and rotate it counterclockwise to remove the pulley and the belt, as shown in the following video tutorial. Remove the belt and clean the area thoroughly, apply a bit of oil, and insert the new belt. After fitting it, reattach the pulley and all previously removed components.

Updated on 23 July 2026 by ScegliAuto

Video tutorial

Related tutorials

Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Guide to Replacing the Timing Belt on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. replacing the timing belt on the Mercedes-Benz B-Class. Firstly, the timing belt should generally be replaced around 62,000 miles for both petrol and.. …
How to Replace the Timing Belt on a Mercedes-Benz B-Class
How to Replace the Timing Belt on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / W245, MK 1) .. To replace the timing belt on a Mercedes-Benz B-Class, open the bonnet and disconnect the negative terminal of the battery. Raise the vehicle and remove.. …
How do you replace the water pump of the Mercedes B-Class?
How do you replace the water pump of the Mercedes B-Class?
Mercedes Classe B (2011-2019 / W246, MK 2) .. to replace the water pump of the Mercedes Class B by opening the hood and accessing the components located on the left side of the engine block:.. …

Other guides you may be interested in

How to Reset the Tyre Pressure Light on the Opel Grandland X

While driving, if you notice the tyre pressure warning light coming on, first check the actual inflation pressure of the tyres and, if necessary, restore the pressures recommended by the manufacturer. After restoring the correct pressures, you need to reset the warning light that has illuminated on the instrument cluster. To do this, locate the reset button on the lower central console. Press this button and hold it down for at least 3 seconds, after which the low pressure indication will turn off.

Watch the video!


by ScegliAuto

More videos