Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Fan Resistor on a Class B

Model: Mercedes Classe B MK 1, W245 - Years: 2005, 2006, 2007, 2008, 2009, 2010, 2011
Part: Blower motor

See other generations:
Video tutorial

Replacing the fan resistor in your car? Remove the fan resistor on the Class B. Disconnect the cover located at the bottom of the centre tunnel, and locate the air fan resistor. Remove the resistor from its housing without damaging the plastics.

Fit a new resistor in the dedicated space. Check the correct installation of the previously mounted parts.

Cover the new resistor with the protection. Turn on the instrument panel, then the car fan, and check the operation of the car's ventilation.

Turn off the instrument panel after the test.


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
How to Replace the Cabin Fan Resistor on a Mercedes-Benz B-Class - A-Class
Mercedes Classe B (2005-2011 / MK 1, W245) This guide outlines the procedure for removing and replacing the cabin fan resistor on a Mercedes-Benz B-Class, as well as the A-Class. First, get in…
Removing the Fan Resistor on a Mercedes-Benz B-Class
Removing the Fan Resistor on a Mercedes-Benz B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) This brief and simple guide shows how to remove and replace the cabin fan resistor on a Mercedes-Benz B-Class, as well as on the A-Class. First, get …
Replacing the Cabin Air Filter of the Mercedes B-Class
Replacing the Cabin Air Filter of the Mercedes B-Class
Mercedes Classe B (2005-2011 / MK 1, W245) To prevent dirt and dust from entering the ventilation system of the Mercedes B-Class, a specific filter has been installed. To maintain its efficien…

How to reset the tyre pressure warning light on the Kia Niro EV?

To reset the tyre pressure warning light on the Kia Niro EV, inflate the tyres until they reach the correct pressure value. This value is indicated on the sticker attached to the driver's door pillar. Once the tyres are inflated, turn on the instrument cluster to check that the warning light has completely disappeared from the display. If it is still present, you may need to drive for a few miles to ensure it disappears completely from the screen.

Watch the video!


by ScegliAuto

More videos