Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Slk
    4. : Electric cooling fan

Mercedes Slk - Electric cooling fan

Electric Cooling Fan Mercedes Slk (1997-2004 / r 170, mk 1)

Mercedes Slk (1997-2004 / R170, MK 1)
How to Replace the Hood Trim on a Mercedes SLK
How to replace the hood trim on a Mercedes SLK? Let’s see how to proceed: using a screwdriver (unscrew the screws), remove the side plastic trims covering …Read all…
Posted on 26 March 2026 by ScegliAuto
Speaker (1) Shocks (1) Air conditioning (1) Car stereo (4) Battery (9) Air vents (2) Transmission (1) Spark plugs (3) Convertible top (7) Body (3) Control unit (1) Key (11) Timing belt (1) Air conditioner (1) Onboard computer (3) Checks and maintenance (8) Dashboard (8) MAF sensor (1) Brake rotors (1) Electric cooling fan (1) Headlight (3) Tail light (1) Fog lights (2) Air filter (4) Cabin air filter (5) Fuel filter (1) Grille (1) Light bulb (2) Headlight bulb (5) Tail light bulb (1) Interior dome light bulb (1) License plate light (1) Handle (1) Power window motor (2) Transmission fluid (1) Engine oil (4) Power steering fluid (1) Clock (19) Door trim panel (5) Front bumper (1) Shift knob (3) Pump (1) Fuel pump (1) Car door (1) Instrument cluster (4) Fuse box (25) Seat (2) Axle shaft (1) Crankshaft position sensor (1) Parking sensors (1) Door lock (1) Side mirror (5) Rearview mirror (2) Warning light – error code (8) (1) Tire pressure warning light (1) Service warning light (25) Center console tunnel (4) Blower motor (1) Steering wheel (1)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos