Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Light bulb

Mercedes Sprinter - Light bulb

Light Bulb Mercedes Sprinter (2006-2018 / mk 2, w 906)

Mercedes Sprinter (2006-2018 / MK 2, W906)
How do you replace the bulb of the Mercedes Sprinter's mirror?
In order to replace the bulb in the Mercedes Sprinter's side mirror, you need to pry it out with an object so that the mirror glass is extracted from its …Read all…
Posted on 31 July 2024 by ScegliAuto
Mercedes Sprinter (2006-2018 / MK 2, W906)
How to Replace the Headlight Bulbs on a Mercedes Sprinter?
To replace the headlight bulbs on a Mercedes Sprinter, first open the bonnet to access the engine compartment. Locate the plastic cover at the back of the …Read all…
Posted on 1 June 2026 by ScegliAuto
Airbag (1) Alternator (5) Speaker (4) Car stereo (6) Battery (10) Transmission (3) Body (3) Control unit (2) Key (23) Timing belt (1) A/C controls (1) Onboard computer (3) Checks and maintenance (13) Dashboard (3) Brake rotors (2) Headlight (4) Tail light (1) Air filter (10) Cabin air filter (4) Diesel fuel filter (9) Oil filter (1) Clutch (1) Grille (1) Accessory kit (1) Light bulb (2) Headlight bulb (4) Tail light bulb (2) Antifreeze coolant (1) Handle (1) Engine oil (5) Clock (38) Door trim panel (3) Front bumper (1) Brake pads (2) Shift knob (2) Car door (3) Instrument cluster (2) Radiator (2) Wheel (7) Fuse box (78) Seat (3) Door lock (1) Side mirror (10) AdBlue warning light (18) Warning light – error code (25) (7) Tire pressure warning light (3) Service warning light (136) Manufacturer emblem (2) Turbocharger (1) EGR valve (6) Blower motor (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos