Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Brake rotors

Mercedes Sprinter - Brake rotors

Brake Rotors Mercedes Sprinter (1995-2006 / mk 1, w 901)

Mercedes Sprinter (1995-2006 / MK 1, W901)
How to Remove the ABS Wheel Speed Sensor on a Mercedes Sprinter
Remove the brake disc and the ABS wheel speed sensor. Unscrew the wheel bolts with a socket wrench and (using an air drill) remove the wheel; begin by …Read all…
Posted on 15 May 2026 by ScegliAuto
Mercedes Sprinter (1995-2006 / MK 1, W901)
Front Discs and Pads Replacement
Lift the vehicle on a ramp and remove the front wheel; then disconnect the brake pad wear sensor and pry between the disc and the pads to slightly retract the …Read all…
Posted on 1 March 2026 by ScegliAuto
Airbag (1) Alternator (5) Speaker (4) Car stereo (6) Battery (10) Transmission (3) Body (3) Control unit (2) Key (23) Timing belt (1) A/C controls (1) Onboard computer (3) Checks and maintenance (13) Dashboard (3) Brake rotors (2) Headlight (4) Tail light (1) Air filter (10) Cabin air filter (4) Diesel fuel filter (9) Oil filter (1) Clutch (1) Grille (1) Accessory kit (1) Light bulb (2) Side marker bulb (1) Headlight bulb (4) Tail light bulb (2) Antifreeze coolant (1) Handle (1) Engine oil (5) Clock (38) Door trim panel (3) Front bumper (1) Brake pads (2) Shift knob (3) Car door (3) Instrument cluster (2) Radiator (2) Wheel (7) Fuse box (81) Seat (3) Door lock (1) Side mirror (10) AdBlue warning light (19) Warning light – error code (25) Tire pressure warning light (10) Service warning light (143) Manufacturer emblem (2) Turbocharger (1) EGR valve (7) Blower motor (2) Steering wheel (2)

How to Reset the Tire Pressure Light on a MG ZS?

On the instrument cluster of the MG ZS, the tire pressure light that appears can be reset by inflating the tires to the correct pressure: this value will be indicated on the sticker attached to the driver's door pillar. Once the tires have been properly inflated, you can turn on the instrument cluster and navigate through the menu until you find the option that indicates tire pressure: if this screen shows the new values, the light will turn off; otherwise, you will need to drive for a few miles so that the sensors can read the new values and turn off the light afterward.

Watch the video!


by ScegliAuto

More videos