Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Mercedes
    3. :
  3. Sprinter
    4. : Manufacturer emblem

Mercedes Sprinter - Manufacturer emblem

Manufacturer Emblem Mercedes Sprinter (2006-2018 / mk 2, w 906)

Mercedes Sprinter (2006-2018 / MK 2, W906)
Applying the Manufacturer's Emblem
To apply the manufacturer's emblem on the vehicle's bonnet, it is essential to correctly mark the position to ensure it is perfectly centred, and to thoroughly …Read all…
Posted on 22 February 2026 by ScegliAuto
Mercedes Sprinter (2006-2018 / MK 2, W906)
How to Remove the Manufacturer's Badge
Every car leaves the manufacturer's warehouse with emblems that are usually attached to the bodywork with a strong adhesive that does not damage the paint. …Read all…
Posted on 21 February 2026 by ScegliAuto
Airbag (1) Alternator (5) Speaker (4) Car stereo (6) Battery (10) Transmission (3) Body (3) Control unit (2) Key (23) Timing belt (1) A/C controls (1) Onboard computer (3) Checks and maintenance (13) Dashboard (3) Brake rotors (2) Headlight (4) Tail light (1) Air filter (10) Cabin air filter (4) Diesel fuel filter (9) Oil filter (1) Clutch (1) Grille (1) Accessory kit (1) Light bulb (2) Headlight bulb (4) Tail light bulb (2) Antifreeze coolant (1) Handle (1) Engine oil (5) Clock (38) Door trim panel (3) Front bumper (1) Brake pads (2) Shift knob (2) Car door (3) Instrument cluster (2) Radiator (2) Wheel (7) Fuse box (78) Seat (3) Door lock (1) Side mirror (10) AdBlue warning light (18) Warning light – error code (25) (7) Tire pressure warning light (3) Service warning light (136) Manufacturer emblem (2) Turbocharger (1) EGR valve (6) Blower motor (2) Steering wheel (2)

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos