Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Manufacturer's Badge

Model: Mercedes Sprinter MK 2, W906 - Years: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017
Part: Manufacturer emblem

See other generations:
Video tutorial

Every car leaves the manufacturer's warehouse with emblems that are usually attached to the bodywork with a strong adhesive that does not damage the paint. This guide shows how to remove the manufacturer's badge to achieve a clean and smooth appearance.

Detach the badge from its area, perhaps warming it slightly beforehand until it completely comes off. Once the badge is detached, run your hand over the remaining adhesive to loosen it, applying pressure to remove it until all residues are gone.


Updated on 14 February 2026 by ScegliAuto


Related tutorials

How to remove the front bumper of the Mercedes Sprinter
How to remove the front bumper of the Mercedes Sprinter
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) In this video, we will see how to remove the front bumper of a Mercedes Sprinter: we start by removing the four screws found on the top, then opening…
Applying the Wheel Centre Cap Logo
Applying the Wheel Centre Cap Logo
Mercedes Sprinter (2006-2018 / MK 2, W906) To apply the badge to the centre of the plastic cap on the wheel rim, first clean the area where the badge will adhere, removing any dirt that could …
Mercedes Sprinter Fuse Box Manual
Mercedes Sprinter Fuse Box Manual
Mercedes Sprinter (2018-2026 / Br907, Br910, MK 3) This model of transport vehicle from the German manufacturer has two fuse boxes. The first is located in the cabin under the steering column on the l…

How to Open the Hood of the BMW X3

Today, you will learn how to open and close the hood of the BMW X3. To perform this simple operation, lift the hood release lever located next to the door seal on the driver’s side. After pulling the lever, you will notice that the hood will lift slightly. Position yourself in front of the hood and lift it after moving the internal lever from left to right. To keep the hood secure during maintenance, use the side support rod. To close the hood, simply let it fall back into place.

Watch the video!


by ScegliAuto

More videos